- How to order
- Prodiuction Time
- Art Work
- Shipping
- Payment
- Installation
How to order
- Select the color and size of your sticker
- If you have a custom order.Â
- you can upload the image. We make an extra charge for converting pixel art to vector art.
- Look at our product Convert pixel art to vector art
- We will send you an image of your decal for your approval (approval required).
- After you approve the product it will go into production.
- which will take 2 to 5 days for the product to be ready for shipment.Â
- If you are uploading your own file.
- EPS or Adobe Illustrator vector art file type is required.
It depends on the type of shipping you chose at the time of checkout.
It will take from 2 to 7 days
Only Paypal payments are accepted at the moment.
Installing a vinyl decal can be a fun and rewarding project! Here’s a step-by-step guide to help you get started:
Clean the Surface: Make sure the surface where you want to apply the decal is clean and dry. Use a mild detergent and water to remove any dirt or grease, then let it dry completely.
Position the Decal: Place the decal on the surface without removing the backing paper. Use masking tape to hold it in place and ensure it's aligned correctly.
Apply the Decal: Carefully peel off the backing paper from one corner, exposing the adhesive side. Slowly apply the decal to the surface, smoothing it out with a squeegee or credit card to avoid air bubbles.
Remove the Transfer Tape: Once the decal is applied, gently peel off the transfer tape, starting from one corner and pulling it back at a sharp angle.
Smooth Out Bubbles: If there are any air bubbles, use a pin to poke a small hole and smooth them out with your fingers or a squeegee.
Let it Set: Allow the decal to set for at least 24 hours before exposing it to water or extreme temperatures.
And voilà ! Your vinyl decal should now be perfectly applied. If you have any specific questions or need further assistance, feel free to ask!
Reviews
There are no reviews yet.