- How to order
- Prodiuction Time
- Art Work
- Shipping
- Payment
- Installation
How to order
- Select the color and size of your sticker
- If you have a custom order.
- you can upload the image. We make an extra charge for converting pixel art to vector art.
- Look at our product Convert pixel art to vector art
- We will send you an image of your decal for your approval (approval required).
- After you approve the product it will go into production.
- which will take 2 to 5 days for the product to be ready for shipment.
- If you are uploading your own file.
- EPS or Adobe Illustrator vector art file type is required.
It depends on the type of shipping you chose at the time of checkout.
It will take from 2 to 7 days
Only Paypal payments are accepted at the moment.
Installing a vinyl decal can be a fun and rewarding project! Here’s a step-by-step guide to help you get started:
Clean the Surface: Make sure the surface where you want to apply the decal is clean and dry. Use a mild detergent and water to remove any dirt or grease, then let it dry completely.
Position the Decal: Place the decal on the surface without removing the backing paper. Use masking tape to hold it in place and ensure it's aligned correctly.
Apply the Decal: Carefully peel off the backing paper from one corner, exposing the adhesive side. Slowly apply the decal to the surface, smoothing it out with a squeegee or credit card to avoid air bubbles.
Remove the Transfer Tape: Once the decal is applied, gently peel off the transfer tape, starting from one corner and pulling it back at a sharp angle.
Smooth Out Bubbles: If there are any air bubbles, use a pin to poke a small hole and smooth them out with your fingers or a squeegee.
Let it Set: Allow the decal to set for at least 24 hours before exposing it to water or extreme temperatures.
And voilà! Your vinyl decal should now be perfectly applied. If you have any specific questions or need further assistance, feel free to ask!
Reviews
There are no reviews yet.